A Professional Instruction for the Disassembly for Sony Xperia Z2

The following is a professional instruction for the disassembly for Sony Xperia Z2.

As far as the famous cellphone Sony Xperia Z2 is concerned, it is crucial to decide where to start the disassembly. With the experience in disassembling Z1, it's suitable to start from the glass back shell. And, a thin iron sheet is needed to slightly pry open the adheresive there and keep on along the edge. A disassembly operator must be very patient and careful when handling the back
shell.

After the prying open, without doubt, you will clearly see the battery and mainboard where the chip is firmly covered by metal shield and the battery is also covered by a coil of yellow tape. In this part, you must handle with care about the FPC cables here. The new type of FPC is thin and delicate. Be cautious and patient to keep the cables well as it is.

When you look at the back panel of the cellphone, you'll find the glass panel turns to be rather thin. Beneath the battery, there is the speaker and vibrator. To continue the disassembly, you need to put down all the six screws attaching to the mainboard and battery with a cross-shaped screw driver. Next, take the 3200mAh battery out.

After that, disconnect all the components, ports and cables you can see to guarantee that the cellphone won't be affected in disassembly. Then, it's time to disassemble the postposition camera, and the next step is the phone receiver and headset socket. Now the whole disassembly of Sony Xperia Z2 is finished.